Prozessfluiddynamik und Strömungsmaschinen (B5) - Publikationen

Suche


Omri, Riadh ; Semel, Matthias ; Delgado, Antonio ; Rußwurm, Hans Jörg: Design study of a pyrolysis plant compressor with heavy wall erosion from metal particle impact. In: Fluids Engineering Division (Veranst.) : American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM (ASME 2017 Fluids Engineering Division Summer Meeting, FEDSM 2017 Waikoloa/Hawaii 30.7.-03.08.2017). Bd. 1A. 2017. - ISBN 9780791858042
[doi>10.1115/FEDSM2017-69108] (BibTeX)

Rodriguez Agudo, José ; Luzi, Giovanni ; Han, J. ; Hwang, M. ; Lee, J. ; Wierschem, Andreas: Detection of granular motion using image processing with particular emphasis on rolling motion. In: Review of Scientific Instruments (2017), Nr. 88, S. 051805
[doi>10.1063/1.4983054] (BibTeX)

Rodriguez Agudo, José ; Park, J. ; Luzi, Giovanni ; Williams, M. ; Rauh, Cornelia ; Wierschem, Andreas ; Delgado, Antonio: Experimental Simulation of Methane Hydrate Extraction at High Pressure Conditions: Influence of the Sediment Bed. In: Journal of Physics: Conference Series 950 (2017), Nr. 042043
[doi>10.1088/1742-6596/950/4/042043] (BibTeX)

Rodriguez Agudo, José ; Kwon, S. ; Saur, Roland ; Loekman, S. ; Luzi, Giovanni ; Rauh, Cornelia ; Wierschem, Andreas ; Delgado, Antonio: Flows due to pressure induced dissociation-formation of gas hydrates. In: IOP Conference Series: Materials Science and Engineering 249 (2017), S. 012018
[doi>10.1088/1757-899X/249/1/012018] (BibTeX)

Litfin, Oliver ; Delgado, Antonio ; Haddad, Kais ; Klein, H.: Numerical and experimental investigation of trailing edge modifications of centrifugal wastewater pump impellers. In: Fluids Engineering Division (Veranst.) : ASME 2017 Fluids Engineering Division Summer Meeting (ASME 2017 Fluids Engineering Division Summer Meeting, FEDSM 2017 Waikoloa/Hawaii 30.7.-03.08.2017). Bd. 1A. 2017. - ISBN 9780791858042
[doi>10.1115/FEDSM2017-69123] (BibTeX)

Rodriguez Agudo, José ; Illigmann, Christian ; Luzi, Giovanni ; Laukart, A. ; Delgado, Antonio ; Wierschem, Andreas: Shear-induced incipient motion of a single sphere on uniform substrates at low particle Reynolds numbers. In: Journal of Fluid Mechanics 825 (2017), S. 284-314
[doi>10.1017/jfm.2017.370] (BibTeX)

Borchert, Uwe ; Delgado, Antonio ; Szymczyk, Janusz A.: Development and Testing of Air Foil Bearing System for an Automotive Exhaust Gas Turbocharger. In: Applied Mechanics an Materials 831 (2016), S. 71–80
[doi>10.4028/www.scientific.net/AMM.831.71] (BibTeX)

Semel, Matthias ; Haag, Viktor ; Delgado, Antonio ; Grilliat, Julien: Towards multiple operating point axial fan design. In: ASME (Hrsg.) : ASME (Veranst.) : ASME Turbo Expo 2015: Turbine Technical Conference and Exposition (ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Montreal, Kanada 15.06.-19.06.2015). Bd. 1. 2015, S. 113665. - ISBN 9780791856628
[doi>10.1115/GT2015-42673] (BibTeX)

Willinger, Bettina ; Delgado, Antonio: Analytical prediction for multiple roll systems with negative gaps. In: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, S. 629-630
[doi>10.1002/pamm.201410302] (BibTeX)

Epple, Philipp ; Semel, Matthias ; Willinger, Bettina ; Delgado, Antonio: Compact test rig design for fans and blowers. In: ASME (Hrsg.) : ASME (Veranst.) : Proceedings of ASME International Mechanical Engineering Congress and Exposition (ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE 2014) Montreal, Kanada 14.11.-20.11.2014). Bd. 7. 2014, S. 38972. - ISBN 978-0-7918-4954-5
[doi>10.1115/IMECE2014-38972] (BibTeX)

Miclea-Bleiziffer, Mihai ; Untaroiu, Alexandrina ; Delgado, Antonio: Development of a novel design method for marine propellers by computing the exact lift of arbitrary hydrofoils in cascades. In: Ocean Engineering 83 (2014), S. 87-98
[doi>10.1016/j.oceaneng.2014.03.015] (BibTeX)

Litfin, Oliver ; Delgado, Antonio: On the effect of volute design on unsteady flow and impeller-volute interaction in a centrifugal pump. In: American Society of Mechanical Engineers (ASME) (Hrsg.) : American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM. Bd. 1 B. - : -, 2014, S. 1-12. - ISBN 978-0-7918-4622-3. ISSN 08888116
[doi>10.1115/FEDSM2014-21533] (BibTeX)

Semel, Matthias ; Willinger, Bettina ; Grilliat, Julien ; Delgado, Antonio: On the preliminary design of axial fans: extending the validity of the flow assumptions over the whole hydraulic characteristic and improvement of modeling. In: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, S. 755-756
[doi>10.1002/pamm.201410360] (BibTeX)

Semel, Matthias ; Grilliat, Julien ; Delgado, Antonio: Preliminary design of axial fans at off-design-working points. In: American Society of Mechanical Engineers (ASME) (Hrsg.) : Proceedings of the ASME Turbo Expo (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014 Düsseldorf 16.-20.06.2014). 2014. - ISBN 9780791845578
[doi>10.1115/GT2014-26605] (BibTeX)

Vogel, Thomas ; Epple, Philipp ; Hermann, Andreas ; Grashof, Bettina ; Delgado, Antonio: CFD analyses and design of a turbocompound system. In: American Society of Mechanical Engineers (ASME) (Hrsg.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE 2013) San Diego, USA 15.11.-21.11.2013). Bd. 7 B. 2013, S. 64444. - ISBN 9780791856321
[doi>10.1115/IMECE2013-64444] (BibTeX)

Albert, Sven ; Epple, Philipp ; Grashof, Bettina ; Delgado, Antonio: High efficiency propeller design based on the Betz minimum induced loss condition and CFD validation on an APC 8'' propeller. In: American Society of Mechanical Engineers (ASME) (Hrsg.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE 2013) San Diego, USA 15.11.-21.11.2013). Bd. 7 B. 2013, S. 64382. - ISBN 9780791856321
[doi>10.1115/IMECE2013-64382] (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Rauh, Cornelia ; Delgado, Antonio: Study of the effects of inner pressure and surface tension on the fibre drawing process with the aid of an analytical asymptotic fibre drawing model and the numerical solution of the full N.-St. equations. In: Archive of Applied Mechanics 83 (2013), Nr. 11, S. 1607-1636
[doi>10.1007/s00419-013-0768-z] (BibTeX)

Albert, Sven ; Epple, Philipp ; Delgado, Antonio: Analysis of propeller design methods and validation with the CFD computation of a propeller-pump. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2012 International Mechanical Engineering Congress and Exposition (IMECE 2012) Houston, USA 09.11.-15.11.2012). Bd. 7, PARTS A, B, C and D. Aufl. 2012, S. 275-282. - ISBN 9780791845233
[doi>10.1115/IMECE2012-89501] (BibTeX)

Grashof, Bettina ; Epple, Philipp ; Delgado, Antonio: Analytical model for deformable roll coating with nip feed.Vortrag: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2012), TU Darmstadt, Darmstadt, 26.03.-30.03.2012 (BibTeX)

Willinger, Bettina ; Epple, Philipp ; Delgado, Antonio: Analytical model for deformable roll coating with nip feed. In: Proceedings in Applied Mathematics and Mechanics 12 (2012), Nr. 1, S. 599-600
[doi>10.1002/pamm.201210288] (BibTeX)

Al-Abadi, Ali Khedher ; Ertunç, Özgür ; Epple, Philipp ; Koerbel, Wolfram ; Delgado, Antonio: Development of an experimental setup for double rotor HAWT investigation. In: ASME (Veranst.) : Proceedings of ASME Turbo Expo 2012 (Turbine Technical Conference & Exposition (ASME Turbo Expo) Kopenhagen, Dänemark 11.06.-15.06.2012). Bd. 6. 2012, S. 1007-1016. - ISBN 978-0-7918-4472-4
[doi>10.1115/GT2012-70032] (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Numerical solution and experimental validation of the drawing process of six-hole optical fibers including the effects of inner pressure and surface tension. In: Journal of Lightwave Technology 30 (2012), Nr. 9, S. 1306-1311
[doi>10.1109/JLT.2012.2185486] (BibTeX)

Semel, Matthias ; Epple, Philipp ; Litfin, Oliver ; Grashof, Bettina ; Delgado, Antonio: Prediction of the flow characteristics of an axial fan at off design. In: J. Vad. ; Budapest University of Technology and Economics (Hrsg.) : Proceedings of the Conference on Modelling Fluid Flow (Conference on Modelling Fluid Flow (CMFF 12) Budapest, Ungarn 04.09.-07.09.2012). 2012, S. 1-9. - ISBN 978-963-08-4588-5 (BibTeX)

Semel, Matthias ; Smith, Henrik ; Epple, Philipp ; Litfin, Oliver ; Delgado, Antonio ; Pfannschmidt, Klaus ; Grobeis, Detlev: System matched 3D radial impeller design with variable inlet angle distributions. In: ASME (Veranst.) : Proceedings of ASME Turbo Expo 2012 (Turbine Technical Conference & Exposition (ASME Turbo Expo) Kopenhagen, Dänemark 11.06.-15.06.2012). Bd. 3. 2012, S. 795-802. - ISBN 9780791844694
[doi>10.1115/GT2012-70024] (BibTeX)

Epple, Philipp ; Durst, Franz ; Delgado, Antonio: A theoretical derivation of the Cordier diagram for turbomachines. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225 (2011), Nr. 2, S. 354-368
[doi>10.1243/09544062JMES2285] (BibTeX)

Smith, Henrik ; Semel, Matthias ; Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Delgado, Antonio: Accurate calculation of the slip factor of axial cascades and impellers for arbitrary blade shapes. In: ASME (Veranst.) : Proceedings of the ASME Turbo Expo (ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (GT2011) Vancouver, Kanada 06.06.-10.06.2011). Bd. 4. 2011, S. 523-537. - ISBN 9780791854648
[doi>10.1115/GT2011-46352] (BibTeX)

Grashof, Bettina ; Epple, Philipp ; Delgado, Antonio: Analytical solution of steady state multiple roll system with experimental validation.Vortrag: 9th European Coating Symposium, Turku, Finnland, 08.06.-10.06.2011 (BibTeX)

Miclea-Bleiziffer, Mihai ; Epple, Philipp ; Smith, Henrik ; Semel, Matthias ; Delgado, Antonio: Application of an inverse cascade analytical and numerical design method used in the design of axial fans. In: ASME (Veranst.) : Proceedings of the ASME Turbo Expo (ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (GT2011) Vancouver, Kanada 06.06.-10.06.2011). Bd. 4. 2011, S. 457-470. - ISBN 9780791854648
[doi>10.1115/GT2011-45860] (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Asymptotic analysis of flow processes at drawing of single optical microfibres. In: International Journal of Chemical Reactor Engineering 9 (2011), Nr. 1, S. A65
[doi>10.1515/1542-6580.2710] (BibTeX)

Litfin, Oliver ; Mohr, Christian ; Haddad, Kais Elias ; Epple, Philipp ; Semel, Matthias ; Becker, Klaus ; Klein, Horst ; Delgado, Antonio: CFD computation, analysis and design of a two-bladed wastewater pump. In: ASME (Veranst.) : ASME 2011 International Mechanical Engineering Congress and Exposition (IMECE 2011) (ASME 2011 International Mechanical Engineering Congress and Exposition (IMECE 2011) Denver, USA 11.11.-17.11.2011). Bd. 6, PARTS A and B. Aufl. 2011, S. 919-926. - ISBN 9780791854921
[doi>10.1115/IMECE2011-64195] (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Comparison between an analytical asymptotic fiber drawing model with full Navier-Stokes solution taking into account the effects of inner pressure and surface tension. In: Journal of Lightwave Technology 29 (2011), Nr. 11, S. 1638-1646
[doi>10.1109/JLT.2011.2138117] (BibTeX)

Semel, Matthias ; Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Delgado, Antonio ; Smith, Henrik: Extended mean line theory for axial fans - Analytic calculation of the flow characteristics for off-design points. In: ASME (Veranst.) : Proceedings of the ASME Turbo Expo (ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (GT 2011) Vancouver, Kanada 06.06.-10.06.2011). Bd. 4. 2011, S. 509-522. - ISBN 9780791854648
[doi>10.1115/GT2011-46268] (BibTeX)

Toneva, Petya ; Epple, Philipp ; Breuer, Michael ; Peukert, Wolfgang ; Wirth, Karl-Ernst: Grinding in an air classifier mill - Part I: Characterisation of the one-phase flow. In: Powder Technology 211 (2011), Nr. 1, S. 19-27
[doi>10.1016/j.powtec.2011.03.009] (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Improvement of three-phase flow numerical simulations by means of novel hybrid methods. In: Advanced Powder Technology 22 (2011), Nr. 2, S. 277-283
[doi>10.1016/j.apt.2011.02.007] (BibTeX)

Schneider, Olga ; Epple, Philipp ; Teuber, Erik ; Meyer, Bernhard ; Jank, Michael ; Rauh, Cornelia ; Delgado, Antonio: Jet printing of colloidal solutions - Numerical modeling and experimental verification of the influence of ink and surface parameters on droplet spreading. In: Advanced Powder Technology 22 (2011), Nr. 2, S. 266-270
[doi>10.1016/j.apt.2011.02.003] (BibTeX)

Epple, Philipp ; Semel, Matthias ; Smith, Henrik ; Litfin, Oliver ; Delgado, Antonio: Radial impeller design optimization matched for high efficiency fans. In: ASME (Veranst.) : ASME 2011 International Mechanical Engineering Congress and Exposition (IMECE 2011) (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 Denver, USA 11.11.-17.11.2011). Bd. 6, PARTS A and B. Aufl. 2011, S. 963-973. - ISBN 9780791854921
[doi>10.1115/IMECE2011-65450] (BibTeX)

Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Pfannschmidt, Klaus ; Grobeis, Detlev ; Delgado, Antonio: A design method of radial fans considering the torque-speed-characteristic of the motor. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE 2010) Vancouver, Kanada 12.11.-18.11.2010). Bd. 7, PARTS A AND B. Aufl. 2010, S. 1193-1199. - ISBN 9780791844441
[doi>10.1115/IMECE2010-39050] (BibTeX)

Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Luschmann, Christian ; Ilic, Caslav ; Delgado, Antonio: An extended analytical and numerical design method with applications of radial fans. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE 2009) Lake Buena Vista, Florida, USA 13.09.-19.09.2009). Bd. 9, PART B. Aufl. 2010, S. 1119-1129. - ISBN 9780791843826
[doi>10.1115/IMECE2009-11283] (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Analysis and optimization of the production process of cooked sausage meat matrices. In: American Institute of Physics Inc. (Hrsg.) : AIP Conference Proceedings (8th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2010) Rhodos, Griechenland 19.09.-25.09.2010). Bd. 1281. 2010, S. 1672-1675.
[doi>10.1063/1.3498159] (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Analysis and optimization of the production process of cooked sausage meat matrices.Vortrag: 8th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2010), Rhodos, Griechenland, 19.09.-25.09.2010 (BibTeX)

Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Ilic, Caslav ; Delgado, Antonio: Combined impeller-diffuser design and the influence of slotted guide vanes on the performance of radial diffusers. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE 2009) Lake Buena Vista, Florida, USA 13.09.-19.09.2009). Bd. 9, PART B. Aufl. 2010, S. 1109-1117. - ISBN 9780791843826
[doi>10.1115/IMECE2009-11260] (BibTeX)

Hetzer, Tobias ; Epple, Philipp ; Delgado, Antonio: Exact solution of the plane flow and slip factor in arbitrary radial blade channels and extended design method for radial impellers. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE 2010) Vancouver, Kanada 12.11.-18.11.2010). Bd. 7, PARTS A AND B. Aufl. 2010, S. 1201-1209. - ISBN 9780791844441
[doi>10.1115/IMECE2010-39081] (BibTeX)

Miclea-Bleiziffer, Mihai ; Epple, Philipp ; Schmidt, Harald ; Delgado, Antonio ; Russwurm, Hans: High efficiency design of high pressure radial fan spiraled casings used for biogas transport. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE 2009) Lake Buena Vista, Florida, USA 13.09.-19.09.2009). Bd. 9, PART B. Aufl. 2010, S. 1191-1200. - ISBN 9780791843826
[doi>10.1115/IMECE2009-12521] (BibTeX)

Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Schmidt, Harald ; Delgado, Antonio ; Russwurm, Hans: High pressure fan design for biogas plants. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE 2009) Lake Buena Vista, Florida, USA 13.09.-19.09.2009). Bd. 9, PART B. Aufl. 2010, S. 1271-1281. - ISBN 9780791843826
[doi>10.1115/IMECE2009-12852] (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Improvement of three-phase flow numerical simulations by means of novel hybrid methods.Vortrag: World Congress on Particle Technology (WCPT6), Nürnberg, 26.04.-29.04.2010 (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Influence of surface tension and inner pressure on the process of fibre drawing. In: Journal of Lightwave Technology 28 (2010), Nr. 13, S. 1882-1888
[doi>10.1109/JLT.2010.2049251] (BibTeX)

Miclea-Bleiziffer, Mihai ; Epple, Philipp ; Delgado, Antonio: Inverse analytical and computational design method applied to a low pressure axial fan. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE 2010) Vancouver, Kanada 12.11.-18.11.2010). Bd. 7, PARTS A AND B. Aufl. 2010, S. 1181-1192. - ISBN 9780791844441
[doi>10.1115/IMECE2010-38614] (BibTeX)

Jaffrezic, Benoit ; Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Modelling approaches for flow inside multiphase catalytic reactors.Vortrag: 43. Jahrestreffen Deutscher Katalytiker, Weimar, 10.03.-12.03.2010 (BibTeX)

Groß, Frauke ; Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Modelling of inter-particle collisions in Eulerian-Eulerian multi-fluid approaches.Vortrag: 7th International Conference on Multiphase Flow (ICMF 2010), Tampa, Florida (USA), 30.05.-04.06.2010 (BibTeX)

Schneider, Olga ; Epple, Philipp ; Teuber, Erik ; Jank, Michael ; Rauh, Cornelia ; Delgado, Antonio: Modelling of surface properties for ink-jet printed conductive patterns applications.Vortrag: The 8th Euromech Fluid Mechanics Conference (EFMC8), Bad Reichenhall, 13.09.-16.09.2010 (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Numerical simulation of photonic crystal fibres.Vortrag: The 8th Euromech Fluid Mechanics Conference (EFMC8), Bad Reichenhall, 13.09.-16.09.2010 (BibTeX)

Schneider, Olga ; Epple, Philipp ; Delgado, Antonio ; Teuber, Erik ; Meyer, Bernhard ; Jank, Michael ; Rauh, Cornelia: The influence of solvent compositions and particles concentration on the spreading of droplets and applications to ink-jet printed conductive patterns.Vortrag: World Congress on Particle Technology (WCPT6), Nürnberg, 26.04.-29.04.2010 (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Three-phase flow numerical prediction by means of novel hybid methods. In: Advanced Powder Technology - (2010), Nr. - (BibTeX)

Groß, Frauke ; Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Three-phase flow numerical simulations by means of novel hybrid methods.Vortrag: 7th International Conference on Multiphase Flow (ICMF 2010), Tampa, Florida (USA), 30.05.-04.06.2010 (BibTeX)

Goltz, Isabel ; Kosyna, Günter ; Epple, Philipp ; Delgado, Antonio: Vortex Breakdown und Stallbeginn in einer Axialpumpe. In: Egbers, C., Ruck, B., Leder, A., Dopheide, D. (Hrsg.) : GALA (Veranst.) : Proceedings der 18. GALA-Fachtagung "Lasermethoden in der Strömungsmesstechnik" (Lasermethoden in der Strömungsmesstechnik Cottbus 07.09.-09.09.2010). 2010, S. -. - ISBN 978-3-9805613-6-5 (BibTeX)

Miclea-Bleiziffer, Mihai ; Epple, Philipp ; Pascu, Maria ; Delgado, Antonio: A simple 2D panel approach for designing axial fans.Vortrag: 14th Conference on Modelling Fluid Flow Technologies (CMFF2009), Budapest, Ungarn, 9.09.-12.09.2009 (BibTeX)

Pascu, Maria ; Miclea-Bleiziffer, Mihai ; Epple, Philipp ; Delgado, Antonio ; Durst, Franz: Analytical and numerical investigation of the optimum pressure distribution along a low-pressure axial fan blade. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 223 (2009), Nr. 3, S. 643-658
[doi>10.1243/09544062JMES1023] (BibTeX)

Epple, Philipp ; Karic, Branimir ; Ilic, Caslav ; Becker, Stefan ; Durst, Franz ; Delgado, Antonio: Design of radial impellers: A combined extended analytical and numerical method. In: Journal of Mechanical Engineering Science 223 (2009), Nr. 4, S. 901-917
[doi>10.1243/09544062JMES1196] (BibTeX)

Scheit, Christoph ; Karic, Branimir ; Delgado, Antonio ; Epple, Philipp ; Becker, Stefan: Experimental and computational study of radial impellers with respect to efficiency and noise production.Vortrag: Conference on Modelling Fluid Flow (CMFF 2009), Budapest University of Technology and Economics, Budapest, Ungarn, 09.09.-12.09.2009 (BibTeX)

Dzhimova, Olga ; Epple, Philipp ; Rauh, Cornelia ; Delgado, Antonio ; Jank, Michael: Fluid dynamics for printable electronics.Vortrag: EAM Symposium 2009, Wildbad Kreuth, 22.11.-26.11.2009 (BibTeX)

Münsch, Manuel ; Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio ; Leugering, Günter: Modelling and simulation of complex media capable of flowing.Vortrag: EAM Symposium 2009, Wildbad Kreuth, 22.11.-26.11.2009 (BibTeX)

Luzi, Giovanni ; Epple, Philipp ; Scharrer, Michael ; Singh, Jaswinder Pal ; Fujimoto, Ken ; Rauh, Cornelia ; Delgado, Antonio: Modelling of photonic crystal fiber drawing.Vortrag: EAM Symposium 2009, Wildbad Kreuth, 22.11.-26.11.2009 (BibTeX)

Epple, Philipp ; Rauh, Cornelia ; Delgado, Antonio ; Scharrer, Michael ; Russell, Philip: Modelling of photonic crystal fiber drawing.Vortrag: EAM Science day, Erlangen, 09.02.2009 (BibTeX)

Jaffrezic, Benoit ; Diez Robles, Lucia ; Horneber, Tobias ; Rauh, Cornelia ; Delgado, Antonio: Multiscale numerical simulation of multiphase chemical reactors.Vortrag: EAM Symposium 2009, Wildbad Kreuth, 22.11.-26.11.2009 (BibTeX)

Diez Robles, Lucia ; Rauh, Cornelia ; Delgado, Antonio: Numerical simulation of a three-phase biotechnological flow supported by novel hybrid methods.Vortrag: Jahrestreffen der Fachausschüsse Mehrphasenströmungen und Wärme- und Stoffübertragung, Bad Dürkheim, 02.03.-05.03.2009 (BibTeX)

Pascu, Maria ; Epple, Philipp ; Delgado, Antonio ; Durst, Franz: Parmeterization of the total pressure distribution along a low-pressure axial fan blade according to the design requirments. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE 2008) Boston, USA 31.10.-06.11.2008). Bd. 10, PART B. Aufl. 2009, S. 1343-1352. - ISBN 9780791848715
[doi>10.1115/IMECE2008-66357] (BibTeX)

Epple, Philipp ; Miclea-Bleiziffer, Mihai ; Delgado, Antonio: Performance optimization method for radial fans with combined vaneless circular and volute diffusers applied to an industrial fan. In: ASME (Veranst.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE 2008) Boston, USA 31.10.-06.11.2008). Bd. 10, PART B. Aufl. 2009, S. 1353-1362. - ISBN 9780791848715
[doi>10.1115/IMECE2008-66362] (BibTeX)

Epple, Philipp ; Becker, Stefan ; Ilic, Caslav ; Karic, Branimir ; Ali, Irfan ; Delgado, Antonio: Adapting a high-speed train to winter in Russia. Simulation helps prevent traction problems for rail travel during extreme weather conditions. In: ANSYS Advantage 2 (2008), Nr. 2, S. 36-37 (BibTeX)

Zima-Kulisiewicz, Ewelina ; Diez Robles, Lucia ; Kowalczyk, Wojciech ; Hartmann, Christoph ; Delgado, Antonio: Biofluid mechanical investigations in Sequencing Batch Reactor (SBR). In: Chemical Engineering Science 63 (2008), Nr. 3, S. 599-608
[doi>10.1016/j.ces.2007.09.048] (BibTeX)

Rauh, Cornelia ; Epple, Philipp ; Delgado, Antonio ; Mecke, Klaus ; Leugering, Günter ; Russell, Philip ; Peschel, Ulf ; Wondracek, L. ; Scharrer, Michael: Modellierung, Numerische Simulation und Optimierung des Faserziehens.Vortrag: Seminar Exzellenzcluster EAM, 2.06.2008 (BibTeX)

Diez Robles, Lucia: Novel hybrid methods applied to the numerical simulation of a three phase biotechnological flow. Erlangen, Universität Erlangen-Nürnberg, Diss., 2008 (BibTeX)

Pascu, Maria ; Epple, Philipp: Numerical investigation of the validity of axial blade design. In: ASME (Hrsg.) : ASME International Mechanical Engineering Congress and Exposition, Proceedings (ASME International Mechanical Engineering Congress and Exposition (IMECE 2007) Seattle, USA 11.11.-15.11.2007). Bd. 8, PART A. Aufl. 2008, S. 437-445. - ISBN 0791843025
[doi>10.1115/IMECE2007-42960] (BibTeX)

Benning, Rainer ; Diez Robles, Lucia ; Zima-Kulisiewicz, Ewelina ; Delgado, Antonio: The ecological and economical potential of wastewater treatment adjusted to varying initial conditions.Vortrag: Fourteenth World Congress of Food Science & Technology, Shanghai, China, 19.10.-23.10.2008 (BibTeX)

Diez Robles, Lucia ; Zima-Kulisiewicz, Ewelina ; Kowalczyk, Wojciech ; Delgado, Antonio: Investigation of multiphase flow in sequencing batch reactor (SBR) by means of hybrid methods. In: Chemical Engineering Science 62 (2007), Nr. 6, S. 1803-1813
[doi>10.1016/j.ces.2006.12.005] (BibTeX)

Zima-Kulisiewicz, Ewelina ; Diez Robles, Lucia ; Kowalczyk, Wojciech ; Delgado, Antonio: Sequencing batch reactor (SBR) as optimal method for production of granular activated sludge (GAS) - fluid dynamic investigations. In: Water Science and Technology 55 (2007), Nr. 8-9, S. 151-158
[doi>10.2166/wst.2007.253] (BibTeX)

Akaydin, Dogus Hüseyin ; Epple, Philipp ; Ertunç, Özgür: Einfluss der Kompresibilität auf den Wirkungsgrad eines Gebläses: Teil 1. In: HLH Lüftung/Klima Heizung/Sanitär Gebäudetchnik 57 (2006), Nr. 1, S. 52-55 (BibTeX)

Akaydin, Dogus Hüseyin ; Epple, Philipp ; Ertunç, Özgür: Einfluss der Kompressibilität auf den Wirkungsgrad eines Gebläses: Teil 2. In: HLH Lüftung/Klima Heizung/Sanitär Gebäudetchnik 58 (2006), Nr. 2, S. 52-57 (BibTeX)

Toneva, Petya ; Peukert, Wolfgang ; Wirth, Karl-Ernst ; Epple, Philipp ; Breuer, Michael: The flow field in the mill - a key factor for the prediction of the comminution result. In: Univ. of Pittsburgh School of Eng., AICHE - Nanotechnology Forum, AICHE - Particle Technology Forum, Beckman Coulter, Malvern Instruments (Hrsg.) : AIChE Annual Meeting, Conference Proceedings (2006 AIChE Spring National Meeting - 5th World Congress on Particle Technology Orlando, USA 23.04.-27.04.2006). 2006, S. 9 Seiten. (BibTeX)